Clarketech (2)

447 Files non sono visualizzati a causa dei filtri

Filtra					Mostra per Pagina
Nome	Rating	Dimensione	Data Inserimento	Totale Downloads
Clarke Teck et9000 Control Center 1....		4,7 MB	11/01/2011	429	Scarica File
How to Use ET9000CC ---------------------------------- 1. Run the ET9000CC.exe application. 2. Enter the IP address of your Receiver in the IP Address field, example 192.168.1.5 3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank. 4. Click Connect Button Telnet --------- Self explanatory. For a list of Busybox commands check out the following website: _www.busybox.net/downloads/BusyBox.html FTP ---- Click the FTP Button. This will load FileZilla FTP Client and automatically connect to your Receiver For instructions on using FileZilla check out the following website: _wiki.filezilla-project.org/Using Settings Backup ------------------------- Click on Settings Backup Button. Click the Backup Settings Button. This will backup all the settings from the Receiver to the enigma2 and tuxbox folders on your PC HDD. The /enigma2 and /tuxbox folders will be located in the same folder as this program. Click the Restore Clarke Tech Receiver Settings Button. All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Receiver Once the files have successfully been restored you'll have to reboot the receiver by powering off and on using the switch on the back of the receiver. Media Files Manager --------------------------------- Uploading a Media File: Select the Hard Drive and folder that contains your Media File. Select the PVR device you have installed from the "Choose PVR Device" drop down window. Click on the Local file you want to upload so it's highlighted in blue. Click the Upload Button to transfer the file from your local HDD to the Receiver. Downloading a Media File: Select the Hard Drive and folder that you wish the file to be transferred too. Select the PVR device you have installed from the "Choose PVR Device" drop down window. Click on the Remote file you want to download so it's highlighted in blue. Click the Download Button to transfer the file from the Receiver to your local HDD. Deleting Local File: Select Local file so it's highlighted in blue. Click Delete Local File Button. Deleting Remote File: Select remote file so it's highlighted in blue. Click Delete Remote File Button. HDD Manager ------------------------------ To mount and format a Hard Disk Drive do the following: Select the Hard Disk type. Click the Format Button. This will erase all the data on the Receiver HDD. Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD. You'll see a command prompt when the format has completed. WebControl --------------------------- Click the WebControl Button to open WebControl in your default web browser. Upload Channel List -------------------------------- Select the local directory where the Channel List is sorted. Double click the folder to list the files. Click the "Upload Channel List" Button. When you see the "Channel List Uploaded! Reboot Receiver" message box appear click OK. Now Reboot Receiver by powering off and on. Thanks : sat-universe and elgeneral

Clarketech (2)

Clarke Teck et9000 Control Center 1....